User's Manual
Table Of Contents
- SUPPORT
- FOREWORD
- CONTENTS
- RECEIVER
- TRANSMITTER
- SAFETY
- OPERATION
- CARE AND ERROR CODES
- SPECIFICATIONS
- WARRANTY
- SUPPORT
- FOREWORD
- CONTENTS
- RECEIVER
- TRANSMITTER
- SAFETY
- OPERATION
- CARE AND ERROR CODES
- SPECIFICATIONS
- WARRANTY
300SR/ST - OPERATION 37
LOCATE: BEACON
300SR/ST - OPERATION 37
LOCATE: BEACON
LOCATE: BEACON
If equipped, trace non-metallic pipes or conduits by locating and
following a 29 kHz beacon signal.
IMPORTANT: Large metal objects and other signals (such as
railroad signals or overhead power lines) can distort signal.
Setup
To set up for beacon location:
1. Follow beacon manufacturer’s instructions on battery
installation and testing beacon operation.
2. Attach beacon to plumber’s snake or flex rod.
LOCATE: BEACON
If equipped, trace non-metallic pipes or conduits by locating and
following a 29 kHz beacon signal.
IMPORTANT: Large metal objects and other signals (such as
railroad signals or overhead power lines) can distort signal.
Setup
To set up for beacon location:
1. Follow beacon manufacturer’s instructions on battery
installation and testing beacon operation.
2. Attach beacon to plumber’s snake or flex rod.