User's Manual

300SR/ST - RECEIVER 13
DISPLAY
300SR/ST - RECEIVER 13
DISPLAY
Antenna
The receiver has two antenna modes described below. The icon
for the currently selected mode is shown on the left side of the
display.
Peak
Signal strength peaks when receiver is over
the line being located.
Null
Signal drops to minimum strength when
receiver is over the line being located. Gives a
more precise response when locating lines in
uncongested areas.
IMPORTANT: In congested areas, confirm
location by using peak antenna.
Signal Strength
Signal strength is shown by bars
at top of display and in numeric
display.
ss1122h.eps
Antenna
The receiver has two antenna modes described below. The icon
for the currently selected mode is shown on the left side of the
display.
Peak
Signal strength peaks when receiver is over
the line being located.
Null
Signal drops to minimum strength when
receiver is over the line being located. Gives a
more precise response when locating lines in
uncongested areas.
IMPORTANT: In congested areas, confirm
location by using peak antenna.
Signal Strength
Signal strength is shown by bars
at top of display and in numeric
display.
ss1122h.eps