User's Manual

8500 Tracking System Operator’s Manual Service - 61
As Needed
CMW
Display (in Case)
Change Batteries
Use 6 C-cell alkaline batteries in cased display.
1. Open battery cover.
2. Insert batteries as shown.
3. Close and tighten battery cover.
4. Check operation.
Beacon
Change Battery
Use one lithium or one Power Stick battery in
beacon.
1. Remove battery cap.
2. Insert battery as shown.
3. Install and tighten battery cap.
4. Check operation.
IMPORTANT: Do not mix new and used
batteries. Do not mix battery brands.