User's Manual

2150GR Ground Penetrating Radar
054-140 - Rev. 2
10/36
4.2 Connect the Cables
4.2.1 Connect the battery
Battery and cable support
¾ Put the battery in the battery bag. Put the bag on the PVC base plate. Secure the bag
to the support with the strap provided.
¾ Connect one end of the power supply cable to the BATTERY port on the Control
Unit (1). Connect the opposite end to the white connector on the battery (2).
!
NOTE
The control unit continuously draws current from the battery. To prevent drain,
unplug the battery when the unit is not in use.