Manual

11
Follow the DISASSEMBLE instructions in this manual to remove the lever
and breech block assembly. Clean the barrel bore with a quality gun
solvent using a brass bristle brush and patches appropriate to your rifle’s
caliber. After cleaning the bore with solvent, continue to run clean dry
patches through the bore until the patches come out clean and dry.
Apply a light coat of oil to the bore if the gun will be stored for a long
period of time. Remember to remove the oil with patches before
shooting. The barrel must always be clean and dry without any
obstructions before shooting.
Clean with solvent all the metal parts and lubricate with a quality gun oil.
Reassemble the lever and breech block assembly in the rifle.
STORAGE
Always unload your firearm and store it and ammunition separately in a
locked receptacle out of children’s reach and sight, minimizing the risk
that the gun and ammunition could be easily available for loading and
firing.
USE YOUR RIFLE CAREFULLY AND SAFELY.
SERVICE INSTRUCTIONS
Limited Lifetime Repair Policy
Our Limited Lifetime Repair Policy covers this Charles Daly firearm.
Charles Daly will repair it, at no cost to you, for as long as you own your
Charles Daly firearm; provided you have registered your warranty with
Charles Daly and that no service is performed on your firearm by anyone
other than the Charles Daly Service Department.
If your Charles Daly firearm does require service, contact our service
department by email, letter, fax or telephone. If you ever should have to
send your firearm back for repair please follow these instructions: make
absolutely certain it is unloaded. Do not send ammunition with your