Installation manual

4-1

Installing the Head and Top Cap

Before You Start

Before installing the head and top cap, you must complete the installation of the main body and its cable management

system as described in a previous chapter. You need the following:

• Smart phone with camera and internet connection

• ChargePoint login (provided during ChargePoint Installer Certiﬁcation training)

• Wire stripper

• #2 Phillips screwdriver

Overview of Steps

Installing the head and top cap involves a few simple steps, summarized below and detailed in the remainder of this chapter:

1. Check Boxes for Correct Contents (page 4-2)

2. Prepare Head Assembly for Mounting (page 4-4)

3. Slide Head Assembly into Body (page 4-7)

4. Connect Head Assembly (page 4-8)

5. Use the Wizard to Complete the Installation (Page 4-9)

6. Secure Head Assembly (page 4-11)

7. Prepare the Station for Activation on ChargePoint (page 4-13)

When you have completed these steps, installation is complete.