Installation Manual
Table Of Contents
- Front Cover
- Table of Contents
- Introduction
- Installing a Bollard Mount
- Installing a Wall Mount
- Installing the Head and Top Cap
- Preparing the Station for Activation on ChargePoint
- Troubleshooting
- Appendix A: Preparing the Installation Site for a Bollard Mount
- Appendix B: Removing or Replacing the EV Charging Sign
- Appendix C: CT4000 Power Sharing Instructions
- Appendix D: Limited Product Warranty
5-2
ChargePoint® Charging Stations
Step 1: Pinpoint the Station
Follow these steps to pinpoint the station on ChargePoint.
1. Log in to ChargePoint; then, on the Manage Stations tab, click Pinpoint New Station.
2. Enter the station’s MAC Address and activation password, then click Verify.
NOTE: The station’s MAC Address and activation password is printed on a label that
has been taped to the front of the head assembly. A label is also affixed to the head
assembly itself, but once the head assembly has been installed, you can no longer see
it.
Manage Stations
Pinpoint New Station