Installation Manual
Table Of Contents
- Front Cover
- Table of Contents
- Introduction
- Installing a Bollard Mount
- Installing a Wall Mount
- Installing the Head and Top Cap
- Preparing the Station for Activation on ChargePoint
- Troubleshooting
- Appendix A: Preparing the Installation Site for a Bollard Mount
- Appendix B: Removing or Replacing the EV Charging Sign
- Appendix C: CT4000 Power Sharing Instructions
- Appendix D: Limited Product Warranty
4-2
ChargePoint® Charging Stations
Step 1: Check Boxes for Correct Contents
Top cap
The station’s top cap ships in a box containing:
• Top cap (1)
• Phillips screws (2)
• CT4000 Installation Guide (this document)
As illustrated below, the shape of the top cap depends on whether you are installing a bollard or a wall mount. The bollard
mount’s top cap is more rounded, whereas the wall mount’s back is flatter. If installing both models, pay particular attention
to the top cap’s shape.
Side view
(flat back)
Wall Mount
Side view
(rounded back)
Bollard