Installation Manual
Table Of Contents
- Front Cover
- Table of Contents
- Introduction
- Installing a Bollard Mount
- Installing a Wall Mount
- Installing the Head and Top Cap
- Preparing the Station for Activation on ChargePoint
- Troubleshooting
- Appendix A: Preparing the Installation Site for a Bollard Mount
- Appendix B: Removing or Replacing the EV Charging Sign
- Appendix C: CT4000 Power Sharing Instructions
- Appendix D: Limited Product Warranty
3-4
ChargePoint® Charging Stations
Step 3: Mount Rear Brackets to Wall
Mount each bracket to the wall using screws appropriate
for the type of wall material.
Partially insert the 1/4” - 20 screws into the rear brackets.
Do not fully insert these screws—leave about 3/4”
protruding.
Mount brackets
using screws
appropriate for type
of wall material (not
supplied)
Partially insert
the four supplied
1/4”-20 screws