Care and Use Guide 8.6" Features: - 8.6" stainless steel serrated blade - Precise thickness control ensures accuracy - Recessed power switch adds safety - Rubber suction cup feet provide stability For your safety and continued enjoyment of this product, always read the instruction book - 1 - carefully before using.
IMPORTANT SAFEGUARDS When using any electrical appliance basic safety precautions should always be observed including the following: SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY • To protect against risk of electrical shock, do not put appliance in water or other liquid. • Close supervision is necessary when any appliance is used by or near children. This appliance is not recommended for use by children. • Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury. • Never use abrasive cleaning agents or abrasive cloths when cleaning the unit. • Do not use fingers to scrape food away from cutting blade while appliance is in operation. Cut type injury may result. • Only use the unit when completely assembled. • Do not leave the appliance unattended while it is running.
OVERVIEW OF COMPONENTS 1. Cutting Blade 8.6" 2. Blade Locking Screw 3. Food Pusher 4. Food Carriage 5. Suction Cup Feet 6. On / Off Switch 7. Thickness Control Knob 3 4 1 2 5 6 7 IF MISSING PARTS PLEASE CALL 1-888-815-4252. DO NOT RETURN TO STORE.
BEFORE FIRST USE Before Your First Use Carefully unpack the slicer and accessories. Remove all packaging materials. Wash the removable food pusher and blade in warm, soapy water to remove any dust that may have accumulated during packaging. Do not immerse the motor base, cord or plug in water. Wipe the motor base and food carriage with a damp cloth. CAUTION: The CUTTING BLADE is very sharp. Use care when handling. Assembly: 1. Place assembled slicer on a flat, dry, level surface.
(continued from previous page) 6. Slide the FOOD CARRIAGE towards the CUTTING BLADE. Move back and forth in a slow steady rhythm. 7. You can lubricate the FOOD CARRIAGE rod with a little vegetable oil to allow the FOOD CARRIAGE to glide easier. Caution: To avoid a laceration hazard never attempt to slice food without using the food pusher and/or food carriage. 8. Do not run the slicer continuously for more than 10 minutes to avoid overheating the motor. 9.
2. Carefully remove the CUTTING BLADE from the motor housing. 3. Note: You will notice white grease on the back of the blade as well as in the motor housing. This is a non-toxic FDA approved food grade lubricant and is necessary to keep the motor gears running smoothly. 4. You can apply Vaseline® as needed. 5. Wipe the CUTTING BLADE with a damp cloth in warm soapy water. Dry and rinse thoroughly. Replacing Cutting Blades 1. To replace the CUTTING BLADE, ensure the THICKNESS CONTROL KNOB is set to “0”. 2.
WARRANTY Your product is warrantied for one year from date of purchase against all defects in material and workmanship. Should your product prove defective within one year from date of purchase or receipt, return the unit, freight prepaid, along with an explanation of the claim. Please package your product carefully in its original box and packing material to avoid damage in transit. We are not responsible for any damage caused to the product in return shipment.
