Owner`s manual

OM5050E.2 ™ & © Char-Griller / A&J Mfg. 22
Step 22
1. Place a standard 20 lb. Type 1 LP gas cylinder (see below, not included) into the
cart assembly and connect the cylinder with the gas hose/regulator as shown. (See
page 19 for further instructions).
2. Turn the Screw on the left side of the base panel clockwise to secure the stand-
ard 20 lb. LP gas cylinder.
NOTE: Hose must go under and to
the outside of the leg brace.
Purging using a type 1 connection:
L.P. Gas cylinder evacuation can be accomplished during each purging by using a
Type 1connection. The Type 1 valve outlet has an external 1 5/16” ACME right
hand tread which will accept this connection.
Screw