Owner`s manual

OM5050E.2 ™ & © Char-Griller / A&J Mfg. 19
Step 17
Attach HOODS to the GRILL BODIES using HINGE PINS as shown. Have your helper
stand behind the grill to hold the HOODS in place and keep them from falling. First
place the GAS HOOD onto the GRILL BODY in the closed position then screw the left
HINGE PIN into place. Then place the Charcoal HOOD in place and screw in the right
HINGE PIN. Carefully and slightly open the Charcoal HOOD and insert the center
HINGE PIN from inside the charcoal grill through the HOOD then through the Gas
HOOD and Body as shown. Then insert COTTER PINS through the holes in the three
HINGE PINS.
Hinge Pin