Owner`s manual

OM5050E.2 ™ & © Char-Griller / A&J Mfg. 14
Note: the hose should
be on the outside of
the leg brace.
Side Burner
Venturi Tube
Step 8
Install the SIDE BURNER and the CONTROL PANEL to the GRILL BODY with eight (8)
½” BOLTS and eight (8) LOCK WASHERS. Make sure the SIDE BURNER VALVE tip is
completely inside of the SIDE BURNER VENTURI TUBE see figure below. (NOTE: Hose
should be on the outside of the leg brace). Then tighten all the bolts. Slide GREASE
TRAY onto the rail underneath CATCH PAN. Slide the other GREASE TRAY onto the rail
underneath the SIDE BURNER PAN.
Side Burner Valve
Leg Brace
Hose
GREASE
TRAY
GREASE
TRAY
Note: the hose should
be on the outside of
the leg brace.
Side Burner
Venturi Tube
Step 8
Install the SIDE BURNER and the CONTROL PANEL to the GRILL BODY with eight (8)
½” BOLTS and eight (8) LOCK WASHERS. Make sure the SIDE BURNER VALVE tip is
completely inside of the SIDE BURNER VENTURI TUBE see figure below. (NOTE: Hose
should be on the outside of the leg brace). Then tighten all the bolts. Slide GREASE
TRAY onto the rail underneath CATCH PAN. Slide the other GREASE TRAY onto the rail
underneath the SIDE BURNER PAN.
Side Burner Valve
Leg Brace
Hose
GREASE
TRAY
GREASE
TRAY
Note: the hose should
be on the outside of
the leg brace.
Side Burner
Venturi Tube
Step 8
Install the SIDE BURNER and the CONTROL PANEL to the GRILL BODY with eight (8)
½” BOLTS and eight (8) LOCK WASHERS. Make sure the SIDE BURNER VALVE tip is
completely inside of the SIDE BURNER VENTURI TUBE see figure below. (NOTE: Hose
should be on the outside of the leg brace). Then tighten all the bolts. Slide GREASE
TRAY onto the rail underneath CATCH PAN. Slide the other GREASE TRAY onto the rail
underneath the SIDE BURNER PAN.
Side Burner Valve
Leg Brace
Hose
GREASE
TRAY
GREASE
TRAY