Owner`s manual

OM5050E.2 ™ & © Char-Griller / A&J Mfg. 13
Step 7
Attach (2)SLIDER BRACKETS and (1)STOPPER BRACKET to Bottom of GRILL BODY as
shown on Figure 2 and Figure 3 using (6) #10-24 x 0.40” bolts. NOTE: Oriented
Brackets as shown in Figure 1. Install CATCH PAN by placing CATCH PAN support
brackets on top of SLIDER BRACKETS underneath GRILL BODY, see Figure 4, and
then slide it forward until you can hang the CATCH PAN side bracket onto the STOP-
PER BRACKET. From the rear of the grill, slide the GREASE TRAY into the guides/
rails under the CATCH PAN.
CATCH PAN
Support Bracket
CATCH PAN
CATCH PAN
Side Bracket
Stopper Bracket
Figure 4
(6)#10-24 x
0.40” Bolt
(2) Slider Bracket (1) Stopper Bracket
Slider Bracket
Stopper Bracket
Figure 1
#10-24 x 0.40” Bolt
Slider Bracket
Figure 2
Figure 3
GRILL BODY
Slider Bracket