Product guide

Grease Pan

Tie wrap

Electronic ignition module

Nut

CAUTION

Failure to install grease tray will cause

hot grease to drip from bottom of grill

with risk of fire or property damage

Place grease pan into the back panel.

Connect each of the wires from main burner electrodes and sideburner electrode into the back of Electronic

Ignition Module. Total (4) connections. Connect the two wires [(a) and (b)] from switch wiring harness into the

back of the Electronic Ignition Module. Total (2)connections (A).

NOTE: Switch terminals are larger than electrode terminals and should only be installed in location

shown as (a),(b).

Unscrew the cap and nut from electronic ignition module. Attach electronic ignition module to cart right side

panel with the nut (B).

Insert AA battery into electronic ignition module, negative (—) end first. Replace the cap (C).

AA Battery

Cap

(a)

(b)