Product guide

Wing Nut

Qty. 1

Venturi Clip

Ignitor wire

Electrode

Sideburner valve

Sideburner tube

Sideburner Valve

Sideburner Bezel

Sideburner

Side burner

Valve stem

Control Knob

Sideburner Grate

Wing nut

Valve

Screws and washers

removed from valve bracket

Remove the two screws and washers that factory attached on side burner valve bracket. Attach side burner

bezel and valve with screws and washers that were removed from valve bracket (A). Place side burner into

shelf. Make sure valve is inside side burner tube. Attach side burner with one Wing nut (B). Hook venturi clip to

side burner tube and around manifold. Attach side burner ignitor wire to electrode (C). Press side burner control

knob onto valve stem (D). Place side burner grate on to side burner shelf (E).