Product guide

5
6
Insert front brace under control panel and between cart side panels. Make sure door hinge pin holes are on the top side and
facing the front. Secure using two 1/4-20x1½” screws, 7mm lock washers, and 7mm flat washers on each side.
NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN
ASSEMBLED TO CART.
On back of grill, place upper back panel between side panels and above lower back panel. Secure upper back panel using
two 1/4-20x1½” screw, 7mm lock washer, and 7mm flat washer on each side.
Front Brace
1/4-20x1½” Screw
7mm Lock Washer
7mm Flat Washer
1/4-20x1½” Screw
7mm Lock Washer
7mm Flat Washer
Upper Back Panel
Door Hinge Pin Hole
20