Product guide

Place lower back panel between side panels at rear of bottom shelf. Secure lower back panel to side panels using

two 1/4-20x1/2” screws, 7mm lock washers, and 7mm flat washers on each side.

This step requires two people to lift and

position grill head onto cart. Carefully

lower the grill head onto the cart, aligning

slots at bottom of grill head with posts on

cart side panels. Make sure the regulator

hose is hanging outside the cart. Grill

head must face open side of cart.

Grill Head

Lower Back Panel

1/4-20x1/2” Screw

7mm Lock Washer

7mm Flat Washer

Regulator Hose