Product guide

ASSEMBLY

Place bottom shelf upside down. Insert Caster Pin into the caster mounting plate to lock it in place, shown A.

Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Caster Pin and repeat for

remaining casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at

the front. After all 4 casters are secure remove the Caster Pin and save for future maintenance.

Non-lock Caster

Locking Caster

Bottom Shelf

Front

Rear

Caster Pin

Attach side panels to bottom shelf using three 1/4-20x1/2” screws, 7mm lock washers, and 7mm flat washers per panel.

IMPORTANT: Panel with large hole must be on left side of bottom shelf.

Left Side Panel

(with large hole)

Make sure side panels

are pushed as far to the

rear of bottom shelf as

possible before fully

tightening screws.

Right Side Panel

1/4-20x1/2” Screw

7mm Lock Washer

7mm Flat Washer