User Manual

CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458
START RESTART RESTART
RESTART RESTART
SHUT OFF HERE SHUT OFF HERE
SHUT OFF HERE SHUT OFF HERE
Sample Spread Pattern
• Whennishedspreadingemptyhopperofanyremainingmaterial.
• oroughlywashspreaderandallowtodrybeforestoring.
• Gearsarepermanentlylubricatedatthefactory.DONOTopenthegearboxatanytimeasdebrismayenter
and interfere with functionality.
• Whenusingrocksaltandice-meltproductsbesuretoemptythehopperuponcompletionofspreadingeach
time you use it. ese materials may reconstitute back into a solid block overnight with humidity. ey can also
damage metal parts if exposed for extended periods of time.
STORAGE AND MAINTENANCE
Scotts 2 2.5 3 3.25 3.5 4 4.75 5 5.5 6 7 8 9 10 11 12 13 14 15
Chapin 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
All Season Residential & Professional Push Spreader Application Conversion Chart
All Season Residential &
Professional General Application
Guidelines
Weed Control
Fertilizer
Grass Seed - Overseeding
Grass Seed - New Lawn
Salt & Ice-Melt
10-12
12-16
16-20
21-27
28-30
APPLICATION CHART
•Besuregatecontrolisintheclosedposition.
•Determineappropriatesettingformaterialbeingusedbyreadingthesuggestedsettingonthematerial’sbag
AND/OR by referencing the application chart on your spreader’s control panel (Charts provided are only guidelines.
Be sure to read the instructions on the bag/box of the material you’re spreading to identify accurate setting needed)
•SetthedialtothedesiredsettingImportant Note: Do not adjust dial with gate open.
is will alter the accuracy of gate settings and cause parts to break.
•Tobeginspreading,startwalking(about3mphpace)andpullthegatecontroldowntoopengate.
•Tostopspreadingsimplypushgatecontrolupandthegatewillclose.
GENERAL OPERATING INSTRUCTIONS