Use and Care Manual

•Besuregatecontrolisintheclosedposition(donotholdbaildownwhenlling)
•Determineappropriatesettingformaterialbeingusedbyreadingthesuggestedsettingonthematerial’sbag.
Besuretoreadtheinstructionsonthebag/boxofthematerialyou’respreadingtoidentifyaccuratesettingneeded)
•Tobeginspreading,startwalking(about3mphpace)andpullthebailsystemdowntoopengate
•Tostopspreadingsimplyletgoofthebailandthegatewillclose
GENERAL OPERATING INSTRUCTIONS
STORAGE AND MAINTENANCE
•Whennishedspreadingemptyhopperofanyremainingmaterial
•oroughlywashspreaderandallowtodrybeforestoring
•Tofolddownhandle:
-Simplyremovethebottomtwoboltsonthehandle
-LoosentwoM6Hexnutsandfolddownhandle
-Replacetwobottombolts
-TightenM6Hexnutscompletely
BAFFLE OPERATING INSTRUCTIONS (model 81008A only)
•Adjustbaebyhandtoblockdistributionaccordingly.Frontandsidescanbeadjustedindependently.
•Usewingnutstoadjusttensiononbaes.
•Screwaugerontoimpellersha.ScrewaugerretainingnutintoaugerholewithM10
socketdriver.Tightencompletelytosecure.
CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458
AUGER INSTALLATION (model 81008A only)
GRATE (model 81008A only)
•Ifsaltorspreadingmaterialistoolargeforthegrate,removegratebeforeuse.