Use and Care Manual

Remove the handle from the hopper (4 nuts and bolts).

Note: the gate linkage is nested between the hopper and the

frame for shipment.

Flip handle upright and reattach

handle to hopper using the 4 nuts and

bolts from step 1.

Assemble the gate linkage to the gate by inserting the

“S-shaped” end into the gate.

Note: Let the linkage hang freely - Gate will not stay

attached until completely assembled.

Correct

Orientation

Chapin Spreader Operator’s Manual - English

Suggested Tools:

Wrench and/or Ratchet Set

Pliers

Assembly Instructions

IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT

FAILURE OR INJURIES. FOR SAFE USE OF THIS PRODUCT YOU MUST READ AND

FOLLOW ALL INSTRUCTIONS BEFORE USING.

WARNING