Product specifications

The pump handle can be mounted on either side of the pump
shaft (A). To install the pump handle place the handle (C) over
the shaft (A) aligning the pump handle hole and shaft hole. Push
the straight side of the cotter pin (B) through the aligned hole as
shown in figure 1 thru 3.
INSTALLING THE PUMP HANDLE
Figure 2
Line up holes
3E
SPRAYER COMPONENTS & USE INFORMATION, Continued
Figure 3
Slide clip through holes
Figure 1
R Clip
WAND CLIP
The wand can be attached
to the metal frame using the
wand clips.
Wand Clip
O-ring
Wand
Retaining Nut
Shut-off
Valve
WAND ASSEMBLY
1. Make sure the o-ring is installed on the end of the wand. Insert the wand into shut-off valve.
2. Turn and tighten the retaining nut clock-wise onto the shut-off valve.
The backpack strap is provided with
multiple features including shoulder
strap, chest strap, waist belt and lumbar
support. (figure 1). The top the shoulder
strap is attached to the top of the tank
and is removable. The hook from the
lumbar support attaches to the base tube
on the bottom of the tank (figure 2).
INSTALLING THE SHOULDER STRAP
Hook
Chest
Strap
Lumbar
Support
Waist
Belt
Figure 1
Strap Assembly
Base
Tube
Lumbar
Support
Figure 2
Hook Attachment
Shoulder
Strap