Installation Guide

2E
FILTER
The filter traps dirt particles and prolongs the
life of timer.
CAUTION: Clean filter regularly and replace
if worn.
LCD DISPLAY WARNING
When LCD display
5
shows a quick flash
-
ing “Low Battery” sign, remove the battery
compartment
1
and wait for 60 seconds
until screen clears before re-insert the new
batteries.
Dial
Dial position
indicator
Dial Position Description
RUN Settings confirmed
and saved,timer run
according to settings
SET CLOCK Set clock time
(0:00-23:59)
START TIME Set when to start
watering (0:00-23:59)
HOW LONG Set watering duration
(0-360 mintues)
HOW OFTEN Set watering
frequency
(1,2,4,12 hours
or 1-7 days)
OFF Turn timer off
8
+ BUTTON &
9
- BUTTON
During settings, the number will change
quickly if press and hold the + Button or -
Button
10
RAIN DELAY BUTTON
When dial is at RUN position, press the rain
delay button to set manual watering at 0, 24,
48 or 72 hours.
MANUAL ON/OFF BUTTON
When dial
6
is set in the RUN position, press
the manual on/off button
11
to set manual
watering from 0-240 minutes.
COVER
12
Keep cover closed to protect timer from dust
and dirt.
SENSOR CONNECTION
SOCKET
13
The socket is for rain sensor or
moisture sensor connection, to skip
watering during rainy days or when
soil is too wet. (Sensor sold
seperately)
MALE SNAP-ON CONNECTOR
Connect hose attachment to the male snap-on
connector
14
at the bottom of the timer.
PROGRAMING
THE TIMER
SET CLOCK
Turn dial
6
to SET CLOCK position, press +
Button
8
or - Button
9
to advance or reverse
clock time (hold button for quick advance or
reverse).
START TIME
1. Turn dial
6
to START TIME position, press
+ Button
8
or - Button
9
to advance or
reverse start time (hold button for quick
advance or reverse).
Note: Start time is set in this situation
START TIME
11:00
Instrucon Manual - English