User manual

VFS113 Rack/Desktop Model User’s Guide
D-6
Table D-2 describes the settings you can change here.
SNMP Configuration Screen
Option 3 from the Network Management System Console screen displays the SNMP
Configuration screen.
Table D-3 describes the settings you can change here.
Table D-2. System Configuration screen settings
Option Setting Description
1 IP Address Internet Protocol address of the router. Default is 10.0.0.1.
2 IP Mask Subnet mask. Default is 255.255.255.0.
3 Gateway Default is 0.0.0.0. See your network administrator for more
information.
4 DHCP Enabled? Yes or No toggle that enables or disables DHCP. Default is No
(disabled).
ESC Exit Saves all changes and returns to the Network Management
System Console screen
Note: Before choosing to enable DHCP, contact your network
administrator and make sure you have support for identifying IP hardware
and name server addresses.
Table D-3. System Configuration screen settings
Option Setting Description
1 SNMP Trap Host Host computer’s IP address that is set up to receive SNMP
traps. Default is 0.0.0.0.
2SNMP Traps
Enabled?
On or off toggle to enable SNMP traps. Default is No
(disabled).
3 Read Community SNMP read password. Default is Public.