Communications Network Router User Manual

LAN Configuration
B-7
SNMP Configuration Screen
Option 3 from the Network Management System Console screen displays the SNMP
Configuration screen.
Table B-3 describes the settings you can change here.
Restarting the LAN Board
Option 4 from the Network Management System Console screen restarts the LAN board.
A screen will display notifying you that your system is restarting.
Table B-3. System Configuration screen settings
Option Setting Description
1 SNMP Trap Host Host computer’s IP address that is set up to receive SNMP
traps. Default is 0.0.0.0.
2SNMP Traps
Enabled?
On or off toggle to enable SNMP traps. Default is No
(disabled).
3 Read Community SNMP read password. Default is Public.
4 Write Community SNMP write password. Default is Private.
ESC Exit Saves all changes and returns to the Network Management
System Console screen
Note: After rebooting the LAN connection you can return to the Password
screen by disconnecting and reconnecting the Telnet session.