Product Card

3
If no device, entering the pairing mode. Search for the. Bluetooth name of “K1”and click on the pairing
connection.
Pairing mode: The red and blue LED flash alternately. After connection, the blue LED flashes slowly
once every 5sec with “CONNECT” prompt voice.
Environment
temperature operation
18～45℃
storage
-2～60 ℃
temperature
operation
10
～
80%
，
without gel
storage
10～85%，without gel
Operating conditions
Ordinary office or home environment.
Avoid excessive dust. Avoid direct sunlight or work near the
place which is in light.
Security guidance
1.Be sure to read carefully and keep this manual.
2. Please keep in sealing completely and packing sound when storage and transportation.
3. Before using, put the machine on a solid surface
4. Openings seam slot is for airing, avoid case of overheating in parts, do not cover or jam.
5. Before connecting the power, please make sure the power supply voltage value is DC / 12 V.
6. Connecting DC12V POWER supply, the LED display bright (POWER), indicating that the
machine turn on the POWER, please shut off (POWER) when shutdown
7. Please protect the power cord, ensure it won't be trampled or other may lead to appear
suddenly loses power of accidents, And don't piled up any object on the power line.
8. Please pay attention to the manual mentioned all attention and warnings
9.Shall not take any liquid into the machine sewing, otherwise, it will have a serious damage or
leakage
10. Do not have any changes or amendment to this equipment. If the equipment have any
abnormalities, please look for professional handling.
11. Please don't take this device in or stored in environmental which the temperature is more
than 60 degrees Celsius, otherwise, it will cause damage to equipment.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures: