User Manual

2
The is a 12” structured wiring enclosure which can be mounted
between studs in a standard 2x4 wall or surface mounted to any finished
wall. It is constructed of rigid plastic, making it both durable and
lightweight. Innovative mounting slots on the C-0113 allow it to be
installed and properly adjusted for the desired drywall depth in a less than
a minute! The C-0113 is perfect for the installer looking for a cost-
effective way to implement structured wiring.
C-0113
Features:
!
!
!
!
Hinged Cover
Easy mounting slots
Compatible with Channel Vision structured wiring modules
Knockout for a standard junction box
Hinged Cover
Wiring Knockouts
for 1.5” Conduit
Junction Box Knockout
Note: This product is intended for indoor use only.
Easy Mounting Slots
Left Side
Right Side
3
T
yp
i
ca
lI
nsta
ll
at
i
on
At the desired height, place a drywall screw
in the center of each stud. Do not screw them
all the way in. Align the top two mounting slots
with the screws and slide the enclosure into
place.
When the enclosure is adjusted to
the desired position, tighten the
screws.
Add two more screws in the bottom
slots to secure the enclosure.
2x4 stud
Screws