Aria Aria 4x6 matrix Controller A4603 By Channel Vision 4x6 matrix Controller A4603R By Channel Vision A4603 A4603R 4-input 6-zone Matrix AV Controller By 7
The A4603/A4603R is a 4 input 6 zone matrix A/V controller with pre-amp outputs for each of the 6 zones making it easy to integrate with a high power multichannel amplifier such as Channel Vision’s A1260. Any of the 4 source inputs can be selected and routed to any of the 6 outputs (or zones) independent of the other zones.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions for future reference 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this device near water. 6. Clean only with a dry cloth. 7 Do not block any ventilation openings. Install in accordance with these instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
A4603 A0127 Front Rear Pin 8: +VDC Pin 4: IR signal N.C. Pin 7: Ground Vid 1 Vol + Vid 2 Vid 3 Pin 7: G round Pi n 8 : + VDC signal Pin 4: IR Pin 4: IR signal Pin 7: G ro u n d Pin 8: + VD C Wiring the A0127 keypad... Keypads connect to the A4603 through the RJ-45 jacks on the back panel of the A4603 Connections to the A0127 may be accomplished either by using the RJ-45 jack or the screw terminals provided on the back side of the keypad.
Using the A0501 remote control... The A0501 is designed to allow you to control your A4603 without having to touch the buttons on the A0127. Simply point the A0501 remote control at the IR sensor located at the bottom of the A0127 and press the desired button.
A4603 Re Each zone is controlled through the A0127 keypad which connects to the RJ45 jacks on the rear panel.
ear Panel Power switch Sat radio DVD player CD player 1A/250V rol 1 Serial IR Emitters FUSE Link Power Input Voltage 115 Video Audio Video In 1 2 Termination TPUTS ION IN 1 4 2 Aria by Channel Vision Model A1260 12 Channel Amplifier SPKR IN 3 SPKR R Local IN 2 SPKR R Local L Global 3 230 / 115 VAC 50 / 60 Hz INPUTS ! 4 Video IR Link allows two A4603 units to be joined so that IR signals picked up by the keypads of the first unit can be shared to the second unit.
RS-232 Control Code: For installations requiring more sophistication the A4603 supports RS-232 making it well suited for use with automation systems. Baud Rate: 19200, 8N1 (8Bit Data, No Parity, 1 Stop Bit) Each transmission = 8 ASCII bytes Check Sum = The sum of the first 7 bytes inverted and truncated Note: the check sum for each command is included in the following charts.
Zone 2 Commands Function ASCII Command Hex Command Zone 2 Power Toggle A46Z2PL’ 41 34 36 5A 32 50 4C 2C All Power Toggle A46Z2PA7 41 34 36 5A 32 50 41 37 Zone 2, Select Source 1 A46Z2S1D 41 34 36 5A 32 53 31 44 Zone 2, Select Source 2 A46Z2S2C 41 34 36 5A 32 53 32 43 Zone 2, Select Source 3 A46Z2S3B 41 34 36 5A 32 53 33 42 Zone 2, Select Source 4 A46Z2S4A 41 34 36 5A 32 53 34 41 Zone 2, Volume Up A46Z2V+G 41 34 36 5A 32 56 2B 47 Zone 2, Volume Down A46Z2V-E 41 34 36 5A 32 56 2D 45
Zone 4 Commands Function ASCII Command Hex Command Zone 4 Power Toggle A46Z4PL* 41 34 36 5A 34 50 4C 2A All Power Toggle A46Z4PA5 41 34 36 5A 34 50 41 35 Zone 4, Select Source 1 A46Z4S1B 41 34 36 5A 34 53 31 42 Zone 4, Select Source 2 A46Z4S2A 41 34 36 5A 34 53 32 41 Zone 4, Select Source 3 A46Z4S3@ 41 34 36 5A 34 53 33 40 Zone 4, Select Source 4 A46Z4S4? 41 34 36 5A 34 53 34 3F Zone 4, Volume Up A46Z4V+E 41 34 36 5A 34 56 2B 45 Zone 4, Volume Down A46Z4V-C 41 34 36 5A 34 56 2D 43
Zone 6 Commands Function ASCII Command Hex Command Zone 6 Power Toggle A46Z6PL( 41 34 36 5A 36 50 4C 28 All Power Toggle A46Z6PA3 41 34 36 5A 36 50 41 33 Zone 6, Select Source 1 A46Z6S1@ 41 34 36 5A 36 53 31 40 Zone 6, Select Source 2 A46Z6S2? 41 34 36 5A 36 53 32 3F Zone 6, Select Source 3 A46Z6S3> 41 34 36 5A 36 53 33 3E Zone 6, Select Source 4 A46Z6S4= 41 34 36 5A 36 53 34 3D Zone 6, Volume Up A46Z6V+C 41 34 36 5A 36 56 2B 43 Zone 6, Volume Down A46Z6V-A 41 34 36 5A 36 56 2D 41
Channel Vision Technology will repair or replace any defect in material or workmanship which occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for two years from the date of original purchase. This is a no hassle warranty with no mail in warranty card needed. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment.
