User`s manual
DVR USER MANUAL - Issue 3 - 12/2013 | 41
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
Click the [] icon to enter into [PTZ control] menu shown as Picture 5-60. Now user can control the camera with Pan, Tilt and Zoom capabili-
ties.
Click [Zoom utton to zoom in / out the image; Click [Focus -/+] button to focus the image; Click [Iris -/+] button adjust iris to open or
close.
How to set pre-set point
t Total: Set up pre-set point quantity
t Cur Point: Indicates starting point cruised. System default point is 01. The model support up to 255 pre-set points.
t Stop time: Sets the stop time at each point and range is 1~255;
t GO TO: Allows you go to a specic preset point.
t Set: Allows you set a set of specic preset points of a PTZ camera.
1. Select a camera you desire to set a preset point;
2. Adjust the camera in a desired direction;
3. Click [Set] to set the point as preset point;
4. Click [Save] to save the preset point;
5. Follow the above step to add one more preset point.
t Save all the preset points
t Clean: Allows you delete one selected preset point.
Please Note: Up to 254 pre-sets per one camera can be stored. However, actual preset quantity diers depending on PTZ performance.
Picture 5-60
5.6 PTZ Control