User`s manual

DVR USER MANUAL - Issue 3 - 12/2013 | 39
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
5.3.29 Information
Click [Main Menu - System - Info] and then enter into the menu shown in Picture 5-55
Picture 5-55
Her
e users can check the current Device name, Device ID, Device type, Device
S/N, MAC address, IE version, Software version, Panel version etc.
5.3.30 Advanced: Maintained
Click [Main Menu - Advanced - Maintain] to enter into the maintain interface shown as Picture 6-53
Auto Reboot: You can enable the auto maintain function
regularly as per user’s need.
System Upgrade: After decompressing update le package, copy
the le named “dvrupgrade” to root directory of U ash disk;
Insert the U ash disk into USB port of DVR;
Click <Upgrade>.
Load Default: If [Load Default] is selected, you can initialize the
system to the ex-factory default.
Reboot: Click [Reboot] button to manually restart DVR system.
Shutdown: Click the [Shutdown] button to shutdown the device.
Load Setting: Load the parameters in the U ash disk to device;
after loading successfully, system will auto restart.
Save Setting: Save the parameters of device to a ash disk.
Picture 5-56
Please Note:
1. Do not take out the USB memory or break the power during the update;
2. When the update is done, system will be automatically restarted;
3. Please manually recovery ex-factory default after system rebooting;
4. It will be available only when DVR return back to Preview mode and no any operation.