User`s manual
DVR USER MANUAL - Issue 3 - 12/2013 | 37
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
Picture 5-51
5.3.27 System: General
Click [Main Menu - System - General] to enter into the menu shown in Picture 5-49
You will be allowed to modify system date/time, date/time format, time
zone, language, video format and menu time out.
And click [DST Setup] button to enter into the below interface shown as
Picture 5-50, and you are allowed to congure DST status and mode.
Click [NTP setup] to enter into the interface shown as Picture 5-51 and now
allows you enable/disable the NTP function.
You will be allowed to modify system date/time, date/time format, time zone, language, video format and menu time out.
And click [DST Setup] button to enter into the below interface shown as Picture 5-50, and you are allow to congure DST status and mode.
Click [NTP setup] to enter into the interface shown as Picture 5-51 and now allow you enable/disable the NTP function.
Please Note: The above [NTP function] change will be available only when system connected to internet. And When NTP function is set
to “Enable”, system will calibrate the time at every 00:07:50 and every start-up.
Picture 5-49
Picture 5-50