User`s manual
DVR USER MANUAL - Issue 3 - 12/2013 | 33
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
5.3.21 DDNS Set
DDNS (Dynamic DNS) is a service that registers a domain name and the oating IP address with the DDNS server so that the domain name
can be routed to the IP address; even if the IP address is changed in a dynamic IP system.
Users can visit a remote DVR by using DDNS on above three types (Static, DHCP and PPPoE)
You can apply for a DDNS account for free at the web
www.dyndns.org.
You can register on DVR2009.3322.org or dyndns.org website and get a
domain name, user name, and password.
Server: Select DDNS provider
Host name: Input the host domain name you have registered at dy-
namic domain name system, such as: DVR2009.3322.org;
User Name: Input the user name registered before applying for a do-
main name;
Password: Input a password you set when registering a user name.
Click [Apply] button and restart the DVR; and then enter the
domain name (such as: http://superdvr.3322.org:8080) to visit your
remote DVR.
5.3.22 Alarm: Motion
Click [Main Menu - Alarm - Motion] to enter into the menu shown in Picture 6-38
Channel: Allows you enable/disable the motion function for any
channel.
Area: Click the [Setup] button to enter into area setup interface shown
as Picture 5-41.
Sensitivity: Allows you to set sensitivity level of motion detection from
higher to low with 8 being the most sensitive.
Alarm out: Allows you connect external alarm sensor
Latch time: You can set how long the buzzer will sound when object
move is detected (10s, 30s, 40s, 60s);
Show Message: You can set show message on the screen when mo-
tion alarm is detected.
Buzzer time: You can set how long the buzzer will sound when motion
is detected (o, 10s, 30s, 40s, 60s);
Picture 5-41
Picture 5-42
Send Email :Allows you set the alarm images is issued to a specied email.
Full screen Alarm: The function is defaulted to “On". When the motion is detected, the corresponding channel will be switched to the
full screen mode.