User`s manual
DVR USER MANUAL - Issue 3 - 12/2013 | 30
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
When selecting DHCP from the Type, A router will automatically allocate IP address for your DVR. After restarting each time, the IP address
captured by your DVR may be dierent. So, port forwarding is required when you visit a remote DVR.
1. Select DHCP and click [Save] button;
2. Exit and restart DVR;
3. Input media port and web port
4 Set IP address captured by DVR and web port to a router
5 Visit a remote DVR http: // public net IP: web port (such as: 8080)
http: //intranet IP: web port (such as: 8080 - only use for Intranet)
6 Input the IP address of your domain name server
Please Note:
1. All the parameters you set are available only when you click [Apply] and after the system is restarted.
2. Users need to change MAC addresses when there are multiple DVRs at the same local area network. For details shown in Picture
6-28, please refer to section System Information.
When selecting Static from the Type, user can directly input IP address,
Subnet Mask, Gateway and DNS
1. Set your net type to Static;
2. Set media port number (such as 9000), and the port needs to
be forwarded to a router.
3. Input web port number (such as 8080), and the port needs to be
forwarded to a router;
4. Input a specied IP address to [IP address] column;
5. The Subnet Mask, gateway and DNS server should be consistent
with your router’s congurations.
6. Input DNS address. Please check router rst. The setting should
be consistent with the router’s
7. Click [Apply] button
8. Now you could remotely visit the DVR via IP http: // public net IP:
web port (such as: 8080) http: //intranet IP: web port (such as: 8080 - only
use for Intranet) Shown in Picture 5-33
Picture 5-32
Picture 5-33
Picture 5-34
When selecting PPPoE form the Type, user can input user name and
password provided by ISP and set Media and Web port. And now you can
visit your remote DVR by using the IP address captured after registering a
domain name and web port and connect to your DVR via public network.