User`s manual
DVR USER MANUAL - Issue 3 - 12/2013 | 23
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
5.3.8 Channel Select
5.3.9 Time Axis setup, le clip and zoom in/out
Click [Main Menu - Search - Record search] to enter
into the interface shown below in Picture 5-18
Then tick-select the channel you want to playback;
and click [Play] button to enter into the playback mode
shown in Picture 5-19
Picture 5-18
Picture 5-19A
Picture 5-19
Picture 5-19A-1
1) The DVR supports the processing control bar function when playing back record les shown as Picture 5-19A (Up to 4
CH is available).
2) Click [ ] icon beside
the processing bar to pop up the interface shown as Picture 5-19A-1.
Time Axis: defaulted to 24hours, and allow user select 2hours, 1hour, 30minutes or user-dened.
Detailed operation is as follows:
1. Fixed time axis: If you select [
] option, that means the processing control bar cover two-hours video content.
2. User-dened: select [
]option and move the cursor to processing bar to select start time and/or end time (that is to
say, click any points of the processing bar as start time and/or end time), Now, the whole time axis equals the time quantum
you just selected (shown as Picture 5-19B-1.