User`s manual

DVR USER MANUAL - Issue 3 - 12/2013 | 19
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
5.3.2 Output Mode
Go to [Main Menu - Display - Output] to enter into the
output set interface as shown in Picture 5-5.
Click [Live] to pop up the interface shown as in Picture
5-6. Now you can perform the channel sequence set-
ting.
Picture 5-5
Picture 5-6
Click [Spot output] option and set relative
parameters shown as Picture 5-7.
Click [Spot sequence] to enter into the
interface shown as Picture 5-8.
Picture 5-7
Picture 5-8
Video output: Support CVBS output Live and Spot mode
simultaneously. (Live is the main output, and Spot is the auxiliary output.)
CH Sequence: the option is defaulted to “O” and the sequence time is
5 seconds. Users can activate as desired.
Rotate time: Allows you to set the sequence time. Minimum time can
be set to 3 seconds.
VGA/HDMI Resolution: Allows you to select VGA or HDMI output,
including 800x600, 1024x768, 1280x1024, 1440x900 and HDMI.
Display Mode:
Live output: Display window will include Single, Quad, 9-split and
16-split mode; Spot output: display window will include Single, Quad
and 9-split mode.
Transparency: Allows you to adjust the menu’s transparency, and
its range is 1~128.
Margin: Allows you to adjust the whole screen’s margin. For Details
or operation please refer to Picture 6-10. (On following page)
Volume: Allows you adjust the DVR volume shown as Picture 5-11.
(On following page)
Picture 5-9