The complete professional CCTV kit from Channel Safety Systems CHANNEL SAFETY SYSTEMS Petersfield Business Park Bedford Road Petersfield Hampshire GU32 3QA t: 0845 884 7000 f: 0845 884 6000 e: sales@channelsafety.co.uk w: www.channelsafety.co.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk CONTENTS Safety Instructions ....................................................................................................................................... 5 1. Chapter 1: Features .................................................................................................................................... 6 2. Chapter 2: Overview ...........................................................................................
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk CONTENTS CONTINUED.... 5.3.16 5.3.17 5.3.18 5.3.19 5.3.20 5.3.21 5.3.22 5.3.23 5.3.24 5.3.25 5.3.26 5.3.27 5.3.28 5.3.29 5.3.30 5.3.31 5.3.32 5.4 5.5 5.6 5.7 5.8 5.9 5.10 5.11 5.12 5.13 Log Search ...................................................................................................................................... 29 Network: Network set ....................................................................................
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk CONTENTS CONTINUED.... 6.3.9 6.3.10 6.3.11 6.3.12 6.3.13 6.3.14 6.3.15 6.3.16 6.3.17 7. 7.1 7.2 7.3 7.4 7.5 7.6 Display Configuration .................................................................................................................. 50 Record ............................................................................................................................................. 51 Network Parameters .................
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk SAFETY INSTRUCTIONS Please read all the safety instructions and user manual before the equipment is operated. 1. Power sources This equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power, please consult your supplier. 2.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk CHAPTER 1: FEATURES Function Brief and Description Real time monitoring Double video output; with monitor, VGA virtual output port or HDMI Output; Support net-viewer and MP live surveillance and also support zoom in/out, auto sequence and PIP display. Record H.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk CHAPTER 2: OVERVIEW 2.1 Front Panel 2.1.1 8 CH DVR Front Panel 1 Item Key title or Indicator 2 Remark 3 4 Function & Description 1 IP Receiver 2 Power Indicator PWR If the “Green” indicator is on the system is getting power normally. 3 HDD Indicator HDD When the “Red” indicator flashes it means the hard drive is being read or written to.
6 5 4 3 2 1 10 16 15 14 13 12 11 9 17 Item 1 Type Indicator 2 3 4 5 6 7 8 Key title or Indicator Function & Description HDD indicator When the “Red” indicator flashes it means the hard drive is being read or written to.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 2.2 Rear Panel 2.2.
CHANNEL SAFETY SYSTEMS 2.2.3 t: 0845 884 7000 | w: www.channelsafety.co.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 2.3 8-CH Remote Controller Item DVR USER MANUAL - Issue 3 - 12/2013 Key function 1 Channel select 1-8; Numeric key 2 Numeric key; Clicking numeric “0” allow you switch to GUI (Graphical user Interface) function 3 Multiple display mode 4 Enter into Main menu/Exit 5 Up arrow key, Volume adjust 6 Down arrow key, Volume adjust 7 Left/Down key, 8 Select key/Edit key; Confirm the selected operation.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 2.4 16-CH Remote Controller Key Title REC SEARCH Key Function Press the button to enter into manual record.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 2.5 Mouse Operation Alongside using the buttons of the front panel of your DVR or remote controller, you can also use the mouse to perform system operations. Type Function In menu lock mode, Enter into pop-up menu and clicking any sub menu to pop up Log-in window; on menu unlock mode, enter into pop-up menu, and then clicking left key to enter into any sub menu directly.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk CHAPTER 3: DVR INSTALLATION 3.1 HDD Installation (Applicable to the model with HDD drawer) Caution: Please do not install or take out hard drive when CVR is running! (1) The model has a HDD drawer. Please use provide key to take out the HDD drawer and put HDD into the drawer correctly.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk CHAPTER 4: DVR BOOT UP 4.1 System Initialization After connecting the DVR to the Power outlet and pressing the Power button on the front panel, you will enter into the system initializing screen shown in Picture 4-1 Picture 4-1 4.2 Live Interface After finishing initialization the system will enter into screen. Picture 4-2 shows the 16-split display defaulted by system, which shows no video input status.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk CHAPTER 5: DVR MENU 5.1 Pop-up Menu After finishing system initialization, right click your mouse on the main interface mode to enter into the Pop-up Menu. Now you can complete the perform parameter setting and operate on Main Menu, Multi-Pics, PTZ, Auto Cruise, Zoom in/out, Rec. Search, Manual record, Sequence, PIP, and Vo Switch etc.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 5.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 5.3 Main Menu On mode, click [Menu] button on the front panel or Remote controller to enter into Main menu interface shown as Picture 5-2. And also you can click [ ] icon to enter the main menu screen. In Main Menu mode, you can control device management settings, such as Display, Record, Network, Search, Device Picture 5-2 5.3.
CHANNEL SAFETY SYSTEMS 5.3.2 t: 0845 884 7000 | w: www.channelsafety.co.uk Output Mode Go to [Main Menu - Display - Output] to enter into the Click [Live] to pop up the interface shown as in Picture output set interface as shown in Picture 5-5. 5-6. Now you can perform the channel sequence setting. Picture 5-6 Picture 5-5 Click [Spot output] option and set relative Click [Spot sequence] to enter into the parameters shown as Picture 5-7. interface shown as Picture 5-8.
CHANNEL SAFETY SYSTEMS Picture 5-10 5.3.3 t: 0845 884 7000 | w: www.channelsafety.co.uk Picture 5-11 Privacy Zone This function allows you to setup the privacy zone parameters according to Picture 5-12. Each channel can be set up to four privacy zones. Please follow the steps below to setup: 1. Select the area no (Area 1 ~ Area 4); 2. Click [Setup] to adjust the position of the mask area; 3.
CHANNEL SAFETY SYSTEMS 5.3.4 t: 0845 884 7000 | w: www.channelsafety.co.uk Record set: Record Parameters Go to [Main Menu - Record - Record Para] to enter into the interface shown as Picture 5-14. Channel: Allows you to setup the channel you desire. Record: Allows you to setup the record status (Enable/Disable) of each channel Pack Duration: Indicates maximum continuous record time (15, 30, 45 and 60 min). Pre-record: Motion detection and I/O triggered record support Pre-record function.
CHANNEL SAFETY SYSTEMS 5.3.6 t: 0845 884 7000 | w: www.channelsafety.co.uk Main Stream Go to [Main Menu - Record - Main Stream] to enter into the interface shown as Picture 5-16. Resolution: Support 960H and D1. 960H: includes WD1, WHD1 and WCIF; D1: include D1, HD1 and CIF Frame rate: PAL: 1-25 f/s ; NTSC: 1-30 f/s. Bit rate: Uses can select the relative value by the drop down menu. Audio: When tick-selecting the option, system will record video stream with audio simultaneously Picture 5-16 6.3.
CHANNEL SAFETY SYSTEMS 5.3.8 t: 0845 884 7000 | w: www.channelsafety.co.uk Channel Select Click [Main Menu - Search - Record search] to enter Then tick-select the channel you want to playback; into the interface shown below in Picture 5-18 and click [Play] button to enter into the playback mode shown in Picture 5-19 Picture 5-18 5.3.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk Picture 5-19A-2 t Picture 5-19B-1 Record Clip and backup function and Zoom in/out function Picture 5-19B-2 t Clip and backup: When one channel is playing-back, the [ Picture 5-19B-2 ] icon will appear in the [Play control] bar shown as Picture 5-19B-1. Click the icon to start video clip function, click it again to end the function and pop up the dialog shown as Picture 5-19B-2.
CHANNEL SAFETY SYSTEMS 5.3.10 t: 0845 884 7000 | w: www.channelsafety.co.uk Event Search Click [Main Menu - Search - Event Search] to enter into the interface shown in Picture 5-20. You can highlight and double-click the desired record for playback. You can also can filter the records you want to view based on date, time, channel and record mode search. (First Page): Goes to the first page on the list. When you view other pages, clicking [First] button brings you back to Page one.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk Select DVD as backup device and click [Apply] button, and then you enter into the menu shown as Picture 5-23. Picture 5-23 Picture 5-24 After backup finished, please click [OK] button shown in Picture 5-24. Please Note: The File will be saved as *.264 format. You could playback the record files via Dvr Client player. When installing Dvrclient, system will auto install the player. DVD file will be saved as *.nvr format.
CHANNEL SAFETY SYSTEMS 5.3.15 t: 0845 884 7000 | w: www.channelsafety.co.uk Media Player Backup 1. Copy one backup file to your PC. 2. Open Playback player and click “+” icon or 3. Highlight the file you have selected and click [Play] button. Picture 5-25 to find/select the backup file, and then click [open] button.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk Slow button: click the icon to play the backup record at 1/2, 1/4, 1/8 and 1/16 speed. FF button: click the icon to fast forward the backup record at x2, x4, x8 and/or x16 speed. Open: click the icon to open one record file. Click the icon to enter into full screen mode. Click the icon to never place one target to top. Click the icon to place one target to top. Click the icon to place the record playing to the top.
CHANNEL SAFETY SYSTEMS 5.3.16 t: 0845 884 7000 | w: www.channelsafety.co.uk Log Search Go to [Main Menu - Search -Log] option to enter into the Log search interface shown in Picture 5-28. Here you can preview the log information you have searched. Click [Backup] to export all the log information which is listed below in picture 5-29(For other button functions please refer to previous section Event Search) Picture 5-28 Picture 5-29 5.3.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk When selecting DHCP from the Type, A router will automatically allocate IP address for your DVR. After restarting each time, the IP address captured by your DVR may be different. So, port forwarding is required when you visit a remote DVR. 1. Select DHCP and click [Save] button; 2. Exit and restart DVR; 3.
CHANNEL SAFETY SYSTEMS 5.3.18 t: 0845 884 7000 | w: www.channelsafety.co.uk Mobile Set The DVR is currently compatible with mobile phones running Android, Windows Mobile, Symbian operating systems, iPhone and Black berry on 3G networks. Please follow below steps: 1. Configure network parameters, details please refer to section 5.3.15. 2. Configure mobile port no (such as 19011); and the port need forward to router. Details please refer to Section 5.3.17. 3.
CHANNEL SAFETY SYSTEMS 5.3.19 t: 0845 884 7000 | w: www.channelsafety.co.uk Sub Stream Go to [Main Menu - Network - Sub Stream] to enter into the interface shown as Picture 5-36 Video: Allows you to open or close the sub stream output. If you select “Enable” the system will select sub-stream preview. Frame rate: Allows you to set net transmittal frame rate. Users can select the relative value by the drop down menu. Bit rate: Allows you to set net transmittal bit rate.
CHANNEL SAFETY SYSTEMS 5.3.21 t: 0845 884 7000 | w: www.channelsafety.co.uk DDNS Set DDNS (Dynamic DNS) is a service that registers a domain name and the floating IP address with the DDNS server so that the domain name can be routed to the IP address; even if the IP address is changed in a dynamic IP system. Users can visit a remote DVR by using DDNS on above three types (Static, DHCP and PPPoE) You can apply for a DDNS account for free at the web www.dyndns.org. You can register on DVR2009.3322.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk Record Channel: The record channel will be activated when the object move is detected. Post Recording: You can set how long alarm record will last when alarm ends (30s, 1minutes, 2minutes, 5minutes). Copy: Allows you copy current channel parameters to any other channel or all channels. The channel will be separated into a 44x36 grids (PAL/NTSC mode).
CHANNEL SAFETY SYSTEMS Alarm Type Function Sends an alarm when the DVR can’t receive video signals (such as, camera damage, a cable is broken or damaged or there is a power supply malfunction). Video Loss Motion Detection 5.3.24 t: 0845 884 7000 | w: www.channelsafety.co.uk When an object moves into the motion detection area, an alarm will be triggered. You can adjust the sensitivity level to suit the needs of your application environment.
CHANNEL SAFETY SYSTEMS 5.3.25 t: 0845 884 7000 | w: www.channelsafety.co.uk PTZ Set Click [Main Menu - Device - PTZ] to enter into the below window shown as Picture 5-47 Picture 5-47 You can select the channel you desire to control and set PTZ protocol (Pelco-D or Pelco-P), Baud Rate (1200, 2400, 4800, 9600), Data bit (8, 7, 6, 5), Stop bit (1, 2), Parity Check (None, Odd, Even, Mark, Space), Address Code and Cruise status respectively.
CHANNEL SAFETY SYSTEMS 5.3.27 t: 0845 884 7000 | w: www.channelsafety.co.uk System: General Click [Main Menu - System - General] to enter into the menu shown in Picture 5-49 You will be allowed to modify system date/time, date/time format, time zone, language, video format and menu time out. And click [DST Setup] button to enter into the below interface shown as Picture 5-50, and you are allowed to configure DST status and mode.
CHANNEL SAFETY SYSTEMS 5.3.28 t: 0845 884 7000 | w: www.channelsafety.co.uk Users Click [Main Menu - System - Users] option and you enter into the menu shown in Picture 5-51 The model supports up to seven users with one Admin and six users. Click [Edit] button to enter into the [User Edit] interface shown as Picture 5-53. And input user name and password. Select one and click , and then enter into interface shown as Picture 5-54.
CHANNEL SAFETY SYSTEMS 5.3.29 t: 0845 884 7000 | w: www.channelsafety.co.uk Information Click [Main Menu - System - Info] and then enter into the menu shown in Picture 5-55 Here users can check the current Device name, Device ID, Device type, Device S/N, MAC address, IE version, Software version, Panel version etc. Picture 5-55 5.3.
CHANNEL SAFETY SYSTEMS 5.3.31 t: 0845 884 7000 | w: www.channelsafety.co.uk Event Click [Main Menu - Advanced - Event] to enter into the interface shown as Picture 5-58. Event Type: Support the three abnormal types: Disk No Space, Disk Error and Video Loss. Enable: Allow you activate abnormal alarm.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 5.6 PTZ Control Picture 5-60 Click the [] icon to enter into [PTZ control] menu shown as Picture 5-60. Now user can control the camera with Pan, Tilt and Zoom capabilities. Click [Zoom utton to zoom in / out the image; Click [Focus -/+] button to focus the image; Click [Iris -/+] button adjust iris to open or close. How to set pre-set point t Total: Set up pre-set point quantity t Cur Point: Indicates starting point cruised.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 5.7 PIP Mode You can display a Picture-in-Picture in live mode. PIP has two display modes, including 1x1 display mode and 1x2 display mode, as shown below. 1x1 display mode 1x2 display mode 5.8 Record Search You can enter into the [Record Search] menu from Pop-up menu conveniently and quickly and search/playback the record histories. Refer to Record search as detailed in Section 6.3.7 5.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk CHAPTER 6: WEB APPLICATION MANAGER 6.1 ActiveX control download and installation Open your web browser and input the IP address and web port of DVR, for example - http://172.18.6 202:8080/ . If your computer is connected to internet, it will download and install “ActiveX” Plug-in automatically. If your computer system is Vista, you may need to setup the user authority.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 6.2 Web Application Manager Log-in After plug-in installation, please input your user name, password and client port number; and select or , and then tick-select ; Now click [Log-in] button; you are now allowed to access at the remote DVR and monitor live video images using Web browser anytime from virtually anywhere.
CHANNEL SAFETY SYSTEMS 6.3.2 t: 0845 884 7000 | w: www.channelsafety.co.uk Live Display After running the Web Application Manager on your local PC, the system will be defaulted to enter into the interface shown in Picture 7-3 on the previous page. You can click the [Play] button to Open/close live images and enter into on-spot record and Capture, quad, 9-split or 16-split mode by operating the control bar on the bottom of screen.
CHANNEL SAFETY SYSTEMS 6.3.3 t: 0845 884 7000 | w: www.channelsafety.co.uk PTZ Control 1: PTZ moving Direction control: allows you to control the PTZ camera direction. And the middle button is called [Auto-cruise] button. 2. PTZ speed control bar 3: Iris, Focus and Zoom control 4: Preset setting/clear; Start cruise /stop cruise Picture 6-5 6.3.4 Video Control Adjust video Hue; Adjust video brightness; Adjust video Contrast; Adjust video saturation; Restore factory default settings.
CHANNEL SAFETY SYSTEMS 6.3.6 t: 0845 884 7000 | w: www.channelsafety.co.uk Record Search Firstly, select one day you want to check and tick-select and the channels you desire to playback shown as Picture 6-8 Picture 6-8 Secondly, select record type (Normal record, Alarm record and All) and then click the search button shown as Picture 6-9.
CHANNEL SAFETY SYSTEMS 6.3.7 t: 0845 884 7000 | w: www.channelsafety.co.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk Picture 6-11 Record file download Click the [ ] icon to enter into the menu shown in Picture 6-12. Picture 6-12 Tick-select the record files you want to download and click [Start download] The System will download the record files in turn and save to local PC.
CHANNEL SAFETY SYSTEMS 6.3.8 t: 0845 884 7000 | w: www.channelsafety.co.uk Configuration Click the [Configuration] option to enter into the [Config] menu shown in Picture 6-13 below. Here you set Display configuration, Record, Network, Alarm, Device, System parameters and Advanced according to your actual request. 6.3.9 Display Configuration From the [Display] option you can navigate to Live and Privacy zone settings. 1.
CHANNEL SAFETY SYSTEMS 6.3.10 t: 0845 884 7000 | w: www.channelsafety.co.uk Record Click the option to navigate sub-options: Record parameter, Schedule and Main stream. Picture 6-15 Picture 6-16 Picture 6-17 1. Record Parameters: Under [Record parameters] option, allow you set channel, record enable, pack time and Pre-record status shown as Picture 6-15. 2. Schedule: Detailed parameters please refer to DVR local setting (shown as Picture 6-16).
CHANNEL SAFETY SYSTEMS 6.3.11 t: 0845 884 7000 | w: www.channelsafety.co.uk Network Parameters Select option to navigate to it’s sub-options: Network, sub stream, Email, mobile and DDNS configuration. The model support three network type, including Static, DHCP and PPPoE. System default as its network type. User could allocate IP and perform Port forwarding for DVR according to different router. When set to “On”, user no needs to perform port forwarding.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk Sub stream (shown as Picture 6-21): Relative parameters should be consistent with DVR local setting. Picture 6-21 Email setting: Click [Email setting] option to allow you set alarm email configuration parameters shown as Picture 6-22. Detailed parameters should be consistent with DVR local setting.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk DDNS Setting After user applies for DDNS service shown as Picture 6-24, you could enable function under any one network type mode (Static, DHCP and PPPoE). Now you remotely visit the DVR through domain name (http://domain name: port No). Details setting should be consistent with DVR local setting.
CHANNEL SAFETY SYSTEMS 6.3.12 t: 0845 884 7000 | w: www.channelsafety.co.uk Alarm Set Click option to navigate to its sub-options: Motion, I/O Alarm shown in Picture 6-24 below. Picture 6-24 Motion Detection: Allows you to configure its , , and etc. Settings should be consistent with the DVR local settings (Shown in Picture 6-25.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk Picture 6-26 6.3.13 Device Click to navigate to its sub-options: HDD and PTZ. HDD: allows you to check out HDD status and overwritten time shown in Picture 6-27 (below). Settings should be consistent with the DVR local setting. Picture 6-27 PTZ Configuration (shown in Picture 6-28 on the next page) setting should be consistent with the DVR local settings.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk Picture 6-28 6.3.14 System Click option to navigate to its sub-options: General, Users and information. General: Users could check the DVR’s language and video system, and also set the system time, date format, DST and NTP shown in Picture 6-29 below. Settings should be consistent with the DVR local settings. Picture 6-29 Users: Allows you to configure user name and password shown in Picture 6-30(On the next page).
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk Picture 6-30 Information: Allows you to check the device name, number, type, MAC address, software version, IE version and hardware version shown in Picture 6-31 below.
CHANNEL SAFETY SYSTEMS 6.3.15 t: 0845 884 7000 | w: www.channelsafety.co.uk Advanced Click to navigate to its sub-options: System update, Load default, Events and system maintain etc. System Update: allows you to upgrade the DVR system remotely shown in Picture 6-32 below. Picture 6-32 Please follow the below steps to upgrade the system: a. Select the upgrade file path shown in Picture 6-33. Please note that the format of upgrade file is *.sw. Picture 6-33 a.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk Picture 6-34 Load Default: Allows you to recover the defaulted parameters of the DVR remotely shown in Picture 6.35. Settings should be consistent with the DVR local settings. Picture 6.-35 Events: Allows you to configure abnormal type, buzzer output time, alarm email and show message shown in Picture 6-36 (On the next page). Settings should be consistent with the DVR local settings.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk Picture 6-36 Maintain: allows you to set the auto system maintain for the DVR remotely shown in Picture 7-38 below. Settings should be consistent with the DVR local setting.
CHANNEL SAFETY SYSTEMS 6.3.16 t: 0845 884 7000 | w: www.channelsafety.co.uk Local Setting Under the option, users can set the record path of record file (Live record and Playback clip file), download path of remote file, Snapshot path, File type (H 264 and AVI) and Internal shown in Picture 6-38 below. Picture 6-38 6.3.17 Click the [ Logout ] icon to return back the log-in interface.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk CHAPTER 7: APPENDIX 7.1 Operation Function Table Type Basic Setting Title Description Page Time setting Set system date/time, display format and day-light saving time 26 Language select Set system language 27 Channel setting Set CH title and position; adjust image color parameter value; set CH display to ON / Off and time display/recording time overlaying to On/Off.
CHANNEL SAFETY SYSTEMS Advanced Setting Network Setting t: 0845 884 7000 | w: www.channelsafety.co.uk User password Set or modify user password 26 Alarm setting Set HDD loss, HDD space, video loss, I/O status, alarm management and Email alarm notifications 15 Motion detection Set on/off status of MD; select sensitivity and set motion detection area.
CHANNEL SAFETY SYSTEMS System info Auxiliary Function Menu button t: 0845 884 7000 | w: www.channelsafety.co.uk Check device ID, software version and MAC address 27 In addition to illustrating picture, Parenthesis generally indicate optional parameter value of previous menu. Enter Clicking the button will save current parameter. Default Recovery Clicking the button will recover current parameters to the system defaults. ESC Clicking the button will exit the current menu.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 7.2 Record Alarm Settings Please refer the below matrix: “” stands for “only alarm but no record”; “AMR” stands for “alarm record”; “NLR” stand for “normal record”; and “NOR” stand for “ no record”. Once the alarm is triggered, alarm icon will occur, and when many alarms are triggered, alarm remarks will occur on the screen.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 7.4 Troubleshooting 1. Q: What can I do if the system does not detect the HDD? A: Check if the power supply system is properly connected and the data cord and power cables are securely connected 2. Q: We have changed the password but can’t remember the new password, how can we access the system? A: If you forget system password, please consult with the service personnel. 3.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 7.
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk 7.
CHANNEL SAFETY SYSTEMS Petersfield Business Park Bedford Road Petersfield Hampshire GU32 3QA t: 0845 884 7000 f: 0845 884 6000 e: sales@channelsafety.co.uk w: www.channelsafety.co.
