User manual

DVR USER MANUAL | 1/49
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
7.3.8 Configuration
7.3.9 Display Configuration
Click the [Configuration] option to enter into the [Config] menu shown in Picture 7-13 below. Here you set
Display configuration, Record, Network, Alarm, Device, System parameters and Advanced according to your
actual request.
From the [Display] option you can navigate to Live and Privacy zone settings.
1. Live: Allows you to modify the channel name, Position, Show time and Record time. If the show time is
set to <disable>, the current system time will not appear on the screen on Live mode; and if the record time is set
to <off>, the system time can’t be found in the record file.
Picture 7-13
2. Privacy zone: Each channel could be set up to four privacy zones as shown in Picture 7-14 below. For
details of parameters please refer to section Privacy Zone. If you want to delete a privacy zone, please firstly select
one zone, and then click the <Clear> button and click <Save> on the right corner.
Picture 7-14