User manual

DVR USER MANUAL | 1/42
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
CHAPTER 6: WEB APPLICATION MANAGER
7.1 Plug-in Download and Installation
Open your web browser and input the IP address and web port of DVR, for example:http://172.18.6.202:8080/ .
If your computer is connected to internet, it will download and install “ActiveX” Plug-in automatically. If your
computer system is Vista, you may need to setup the user authority. Shown below select: Start - setup - control
panel Tick “√” use UAC (User Account Control) to help protect your computer and confirm OK.
Vista system:
Vista
Win-7 system:
WIN7-1
Picture 7-1
WIN7-2
Reminder: If the plug-in program is not downloaded successfully, please check if your browser’s safety level or
firewall setting is too advanced. Please open IE - Select tools - Internet options - Internet Custom level - Enable
the options (shown in Picture 7-1)
If running the web application for the first time, you need about one minute
to finish download and install plug-in, please wait patiently.
Please Note: If you want to use the undated webcam at one computer which
you already login before, please delete the old IE webcam and click [Start -
Run] to input the command characters: “regsvr32/u HiDvrOcx.ocx”, then login
again.