User manual

DVR USER MANUAL | 1/35
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
6.3.25 Serial Set
6.3.27 DST Set
Enter into the [Main menu-Device-Serial] Menu shown in Picture 6-45
To operate the DVR via a keyboard, it is required to set the
communication protocol.
Baud rate: set baud rate of serial communication.
Data bit: set data bit of serial communication.
Stop bit: set stop bit.
Parity Check: set parity check to <None> or other.
Picture 6-45
6.3.26 System: General
Click [Main Menu-System-General] to enter into the menu shown in Picture 6-46
You will be allowed to modify system date, time, date/time
format, language, video format and auto logout.
Picture 6-46
Picture 6-47
Click the [DST Setup] button to enter into the menu shown
in Picture 6-47.
Here you can set the DST status and mode.