User manual

DVR USER MANUAL | 1/28

CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk

When selecting DHCP from the Type, A router will automatically

allocate IP address for your DVR. After restarting each time, the

IP address captured by your DVR may be different. So, port

forwarding is required when you visit a remote DVR.

1. Select DHCP and click [Save] button;

2. Exit and restart DVR;

3. Input media port and web port

4 Set IP address captured by DVR and web port to a router

5 Visit a remote DVR http: // public net IP: web port (such

as: 8080) http: //intranet IP: web port (such as: 8080 - only use for

Intranet)

6 Input the IP address of your domain name server

Picture 6-28

Please Note:

1. All the parameters you set are available only when you click [Apply] and after the system is restarted.

2. Users need to change MAC addresses when there are multiple DVRs at the same local area network. For details

shown in Picture 6-28, please refer to section System Information.

When selecting Static from the Type, user can directly input IP

address, Subnet Mask, Gateway and DNS

1. Set your net type to Static;

2. Set media port number (such as 9000), and the port

needs to be forwarded to a router.

3. Input web port number (such as 8080), and the port

needs to be forwarded to a router;

4. Input a speciﬁed IP address to [IP address] column;

5. The Subnet Mask, gateway and DNS server should be

consistent with your router’s conﬁgurations.

6. Input DNS address. Please check router ﬁrst. The setting

should be consistent with the router’s

7. Click [Apply] button

8. Now you could remotely visit the DVR via IP http: // pub-

lic net IP: web port (such as: 8080) http: //intranet IP: web port

(such as: 8080 - only use for Intranet) Shown in Picture 6-30

Picture 6-29

Picture 6-30

When selecting PPPoE form the Type, user can input user name

and password provided by ISP and set Media and Web port. And

now you can visit your remote DVR by using the IP address cap-

tured after registering a domain name and web port and con-

nect to your DVR via public network.