User manual

DVR USER MANUAL | 1/19
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
6.3.2 Output Mode
Go to [Main menu-Display-Output] to enter into
the output set interface as shown in Picture 6-5.
Click [Live] to pop up the interface shown as in
Picture 6-6. Now you can perform the channel
sequence setting.
Picture 6-5
Picture 6-6
Click [Spot output] option and set relative
parameters shown as Picture 6-7.
Click [Spot sequence] to enter into the
interface shown as Picture 6-8.
Picture 6-7
Picture 6-8
Video output: Support CVBS output Live and Spot mode simulta-
neously. (Live is the main output, and Spot is the auxiliary output.)
CH Sequence: the option is defaulted to “Off” and the sequence
time is 5 seconds. Users can activate as desired.
Rotate time: allows you to set the sequence time. Minimum time
can be set to 3 seconds.
VGA/HDMI Resolution: allows you to select VGA or HDMI
output, including 800x600, 1024x768, 1280x1024, 1440x900 and
HDMI.
Display Mode:
Live output: display window will include Single, Quad, 9-split and
16-split mode; Spot output: display window will include Single,
Quad and 9-split mode.
Transparency: allows you to adjust the menu’s transparency, and
its range is 1~128.
Margin: allows you to adjust the whole screen’s margin. For De-
tails or operation please refer to Picture 6-10. (On following page)
Volume: allow you adjust the DVR volume shown as Picture 6-11.
(On following page)
Picture 6-9