User manual

DVR USER MANUAL | 1/18
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
6.3 Main Menu
On <Live> mode, click [Menu] button on the front panel
or Remote controller to enter into Main menu interface
shown as Picture 6-2. And also you can click [ ] icon
to enter the main menu screen. In Main Menu mode,
you can control device management settings, such as
Display, Record, Network, Search, Device
6.3.1 Display
Go to <Main menu - Display - Live> option and enter into the <Display> setting interface shown as
Picture 6-3.
Picture 6-2
Picture 6-3
Picture 6-4
Channel: allows you to setup the channel you desire.
Name: allows you to setup the channel name, and system
support up to eight characters.
Position: allows you to setup the display position of each
channel.
Colour: Click [Setup] option to enter into the [Color setup]
interface shown as Picture 6-4.
Covert: allows you to enable [Live] surveillance screen.
Show time: allows you to set the system time which appears
in the <Live> screen.
Record time: When set to “Enable”, you can record the
system time into the record history.
Copy: allows you to copy all data from one channel to an
other.
Picture 6-4 shows the Colour Menu where you can adjust
image brightness, saturation, contrast and hue
parameters of each channel.
Explanation
1. The modifications will be available after clicking [APPLY] button on the bottom of the sub-menu windows and
being prompted to save and then clicking [ok] button.
2. If you want to cancel the modification, click [Exit] button to exit the menu.
3. When clicking [DEFAULT] button, all system default values will be reset to default value.
4. System default value indicates the value pre-set at the factory.