User manual

DVR USER MANUAL | 1/15
CHANNEL SAFETY SYSTEMS t: 0845 884 7000 | w: www.channelsafety.co.uk
CHAPTER 4: DVR BOOT UP
5.1 System Initialization
CHAPTER 3: DVR BOOT UP
5.2 Live Interface
After connecting the DVR to the Power outlet and
pressing the Power button on the front panel, you will
enter into the system initializing screen shown in Picture
5-1
After finishing initialization the system will enter into
<Live> screen. Picture 5-2 shows the 16-split display
defaulted by system, which shows no video input
status. Once there are video inputs, the screen will
display live images from the cameras. In Live mode, if
you use the mouse to double-click the live image of any
channel, the image will be maximized to full screen,
by double-clicking again, image will come back to the
16-split display mode; clicking the right button of the
mouse will enter into a Pop-up Menu; clicking the left
button of the mouse allows you select menu items; and
clicking any area outside the menu
allows you exit the Pop-up menu.
Note: When internal HDD is not connected or an error occurs, the character “H” will appear on the first channel
of the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter into [Main
menu Alarm] to set HDD loss, HDD space not enough and alarm output to “off”
Picture 5-1
Picture 5-2