Instruction manual

80
recorded.
Spot Event Dwell Time: Sets the output duration of the sensor recording video.
Sequence: Sets whether to automatically switch or not the video output to spot terminal.
Sequence Dwell Time: Sets the video switching interval if Sequence is set to ON.
Spot Channel: Sets the channel that outputs video to the spot terminal.
SUBMIT: Save surely by pressing this button after setting the value.
9-7-4. Storage
Select Storage to configure continued recording settings by overwriting the hard disk and the storage
period for the recording data.
Overwrite: To continue recording by overwriting when the hard disk becomes full, check the checkbox.
Disk Info: User can know his/her disk information; HDD size, start time and last time.
Record Limit: Sets whether to limit or not the recording data storage period.
Record Limit Days: Sets a recording data storage period.
SUBMIT: Save surely by pressing this button after setting the value.
9-7-5. System
Select System to set system and time settings.