Instruction manual

79
9-7-3-3. PTZ
Setting the PTZ Control: Sets the communication environment for remotely operating PTZ dome cameras
connected to RS485 terminals.
Camera channel designation
Name: Sets the protocol type for the specified channel. When connecting multiple cameras, set the same
protocol for all.
Speed: Sets the communication speed. The set value applies to all channels.
ID: Sets the camera ID.
SUBMIT: Save surely by pressing this button after setting the value.
9-7-3-4. Spot Out
Setting the SPOT: Sets the output conditions of the spot video terminal.
Spot Type: Sets the output screen layout of the spot terminal.
Spot On Event: Sets whether to output or not the video of a sensor recording to spot while it is being