Instruction manual

42
3-9. Setup - CONFIG Mode
Press the SETUP button and select CONFIG icon. Then, the config menu is displayed as picture below.
Navigate through the menu items using the mouse or the control button (◀ ▲ ▶ ▼) on the remote control
and change the value of the menu item.
Figure 3.9.1. Config setup screen
Table 3.9.1. Config setup
Item Description
SAVE SETUP
TO A USB
User can save the current configuration (Setting values) of DVR to the USB
memory stick. Put the USB stick on the front panel and press the button to
start the saving process.
LOAD SETUP
FROM A USB
User can upload the configuration of DVR to another DVR using the USB
Memory stick. Put the USB stick on the front panel and press the button to
start the loading process.