Instruction manual

35
(◀ ▲ ▶ ▼) on the remote control and press SEL button. Select
user type and enter the current password. And, enter a new
password, enter the same password again to confirm and select
OK. Then the message “PASSWORD CHANGED” is displayed.
The factory default password is 1111.
When user set this function, they can see a user login window. Then, user can select one of user types
(ADMIN, USER1, USER2, USER3) using the mouse or the control button (◀ ▲ ▶ ▼) on the remote
control. Then password input screen will be displayed. User can select a password using the mouse or the
control button (◀ ▲ ▶ ▼) on the remote control. The factory default password is 1111. It is highly
recommended to assign a new password to protect the system. User can assign a new password in the
SECURITY setup menu.
3-8. Setup – Network Mode
Press the SETUP button and select NETWORK icon. Then, the network menu is displayed as picture below.
Navigate through the menu items using the mouse or the control button (◀ ▲ ▶ ▼) on the remote control
and change the value of the menu item.
Figure 3.8.1. NETWORK setup screen
Table 3.8.1. Menu items in Network Setup screen
Item Description
NETWORK TYPE
Select a type of network connection. Options are:
DHCP, ADSL, LAN
Note. Other parts of the network setup screen change
depending on what network type you select.