Instruction manual

31
▲ ▶ ▼) on the remote control and select the appropriate daylight
saving time zone.
If choosing EU or OTHERS, set the applicable conditions.
The options are:
OFF
USA
EU
OTHERS
1. OFF: Daylight saving is not set.
2. USA: Applies the USA daylight saving time.
3. EU: Applies the EU daylight saving time.
- Select the GMT AREA using the control button (◀ ▲ ▶ ▼).
- Set the time difference with the standard time using the control
button (◀ ▲ ▶ ▼).
4. OTHERS: If the time zone is neither USA nor E, set the start and
end date of the daylight saving period.
- Select BEGIN or END using the control button (◀ ▲ ▶ ▼)
and press the SEL button.
- Select the item using the control button (◀ ▲ ▶ ▼), select
the setting value using the control button (◀ ▲ ▶ ▼) and
press the ESC button to return to SET DATE & TIME setup
menu.
CAUTION:
- Do not set the start time to 23:00 for DLS.
- DLS can’t be applied if the date of BEGIN and END is the same.
CLIENT ACCESS
Enable/Disable remote access through network client software.
BANDWIDTH
SAVING
Enable/Disable only key frame transmission. “ON” mode is favorable for
use of low network bandwidth. Mostly, set “OFF” for normal use.
SEND EMAIL
Enable/disable the send e-mail function.(ON/OFF)