Instruction manual

25
Table 3.4.2. Menu item in ALARM-OUT Setup screen
Item Description
ALARM OUT
Available NO is just one (1).
SENSOR IN
Enable setting up to 1 camera of 4 cameras for each alarm.
MOTION ON
Enable setting up to 1 camera of 4 cameras for each alarm.
VIDEO LOSS ON
Enable setting up to 1 camera of 4 cameras for each alarm.
ALARM DURATION
Set the alarm dwell time from 5 to 60 seconds.
ERROR ALARM
Set the error type for the alarm activation. The options are
OFF, ALL, HDD ERROR and VIDEO LOSS.
3-4-2 SPOT-OUT setup
Figure 3.4.3. SPOT-OUT setup screen
Table 3.4.3. Menu item in SPOT-OUT Setup screen
N-0441L supports just 1 Spot Out.
Item Description
SPOT OUT 1
To use the Spot out function, it has to change CVBS to OFF in a Video
Output menu.
SPOT TYPE
Spot out 1 supports FULL type. (1 channel only)
SPOT ON EVENT
Enable/Disable display of the channel when an event is active.
SPOT EVENT
DWELL TIME
Set the dwell time for the display of the event activated channel.
(1-10sec)
SEQUENCE
Enable/disable sequential display of spot channel in full screen.
If select ON, spot channel selection screen is displayed.
SEQ-DWEL TIME
Set the dwell time for the spot channel display.(1-10sec)
SPOT CHANNEL
Select a channel for spot monitoring using the mouse or the control